Parts index / 5 results
Bucket teeth
Compare the mounting, not just the silhouette. USD, applicable tax included.
UPU-T01 / Bucket teethA broad single-point wedge with a horizontal retaining-pin seat. Compare the pocket taper, pin center and adapter nose before selecting; the pin and adapter are not included.
- Construction
- Cast steel; broad tapered wedge; horizontal pin bore
- Dimensions
- Length 230 mm; width 100 mm; height 85 mm; adapter pocket entrance 78 × 60 mm; pin bore 20 mm
UPU-T02 / Bucket teethA long, narrow single-point construction with a transverse retention seat. Select by the measured adapter geometry and pin position, not by the machine name alone.
- Construction
- Cast steel; long narrow point; transverse pin seat
- Dimensions
- Length 285 mm; width 72 mm; height 88 mm; pocket entrance 66 × 58 mm; cross-pin bore 18 mm
UPU-T03 / Bucket teethTwo separated digging tips form a visibly forked nose. Its wider profile is a different selection from a narrow penetration point; confirm the adapter and side-pin geometry.
- Construction
- Cast steel; bifurcated twin tips; lateral pin seat
- Dimensions
- Length 260 mm; overall width 145 mm; height 90 mm; pocket entrance 80 × 62 mm; pin bore 22 mm
UPU-T04 / Bucket teethA broad cupped flared lip and raised two-hole heel distinguish this bolt-on construction from socket teeth. Confirm the mounting face, hole centers and fastener clearance before fulfilment.
- Construction
- Cast steel; broad cupped flared lip; two-hole raised heel
- Dimensions
- Length 215 mm; lip width 165 mm; heel thickness 22 mm; two 18 mm holes at 70 mm centers
UPU-T05 / Bucket teethA thick chisel-shaped nose with a recessed lock seat. The matching lock system and adapter must be checked separately; no lock or adapter is supplied with this single tooth.
- Construction
- Cast steel; reinforced chisel nose; recessed rotary-lock seat
- Dimensions
- Length 275 mm; width 110 mm; height 105 mm; pocket entrance 84 × 70 mm; lock recess 32 mm